Beam Trolleys for I-Beams: Geared, Push Pull and Electric
A beam trolley runs on the bottom flange of an I-beam and carries a hoist along it, so you can lift a load in one spot and set it down in another. With a chain pulley block or electric hoist hanging from it, a single girder becomes a simple overhead crane for a workshop, pump house or godown.
Beam Trolleys we supply
Geared Trolley
3 modelsHand chain geared trolleys in 1, 2 and 3 ton for moving a hoist along an I-beam with steady, controlled travel.
1 ton – 3 ton
Push Pull Trolley
2 modelsPlain push pull beam trolleys in 1 and 2 ton. Push the load and the trolley rolls along the I-beam.
1 ton – 2 ton
Heavy Duty Electric Trolley
6 modelsMotorised beam trolleys from 500 kg to 10 ton with 0.5 to 5 HP motors, matched to I-beams from 150 × 75 to 350 × 150.
500 kg – 10 tonAbout beam trolleys
We sell three kinds. A push pull trolley, in 1 and 2 ton, moves when you push the load. A geared trolley, in 1, 2 and 3 ton, adjusts to beam flange widths of 75 to 125 mm (75 to 150 mm on the 2 ton) and moves when you pull its hand chain, which gives better control with heavier loads and high beams. The heavy duty electric trolley runs on a motor and comes in 500 kg to 10 ton, with each model matched to an I-beam size from 150 × 75 up to 350 × 150.
Send us your beam size, the load and how far it has to travel on WhatsApp, and we will suggest a trolley and send today's price.
Buying tips
- Measure your I-beam before ordering, because the trolley has to match the beam.
- Keep the trolley capacity equal to or above the hoist that will hang from it.
- Use a push pull trolley for light loads at low height, and a geared trolley when the load is heavy or the beam is high.
- Go electric when the hoist is electric too, or when the trolley covers long runs many times a day.
- Fit end stops on the beam so the trolley cannot run off the end.
Want to know the price? Just ask.
Steel prices change every week, so we share today's price directly. Tell us the product and size and we'll reply on WhatsApp with the price, GST and delivery to your city.
- One piece or a hundred: same quick reply
- Delivery cost included in the quote
- Reply within [REPLY TIME] on working days
Beam Trolleys: common questions
Which I-beam sizes do your electric trolleys fit?
The 500 kg and 1000 kg models fit 150 × 75, the 2000 kg fits 200 × 100, the 3000 kg fits 250 × 125, the 5000 kg fits 300 × 150 and the 10 ton fits 350 × 150.
What is the difference between a geared trolley and a push pull trolley?
A push pull trolley moves when you push the load by hand. A geared trolley has a hand chain that drives its wheels, so it is easier to control with heavy loads or a high beam.
Can I use a trolley with a chain pulley block?
Yes, that is the most common pairing. Keep the trolley capacity equal to or above the chain block's.
How do I get a price for a trolley?
Send the capacity and your beam size on WhatsApp and we will reply with today's price.
Other categories
All products →
Manual Hoists
10 modelsChain pulley blocks, ratchet lever hoists and stainless steel chain blocks from 1 to 10 ton.
1 – 10 ton
Electric Hoists
11 modelsElectric chain hoists from 500 kg to 10 ton, mini wire rope hoists from 300 to 1200 kg and electric winches up to 80 m lift.
300 kg – 10 ton
Clutch Hoists & Stands
7 models1 ton clutch hoists and material hoists with 8 mm rope and 40 m lift, plus stands and rope guides.
1 ton, 40 m lift
Magnetic Lifters
3 modelsPermanent magnetic lifters in 600 kg, 1000 kg and 2000 kg for lifting steel plates and blocks.
600 – 2000 kg